Preamplificatore fono per testine MM/MC. Disponibile anche con alimentatore maggiorato Dino+ o con alimentazione Dino+ G2NC "Never Connected 2". Cavo speciale HP per l'interconnessione all'alimentatore opzionale.
Switch selectable cartridge resistance loading (DIP 1 and 2)
33 ohmsFor Moving Coil cartridges
100 ohmsFor Moving Coil cartridges
1,000 ohmsFor Moving Coil cartridges
47,000 ohmsFor Moving Magnet and some Moving Coil cartridges
Switch selectable capacitance loading (DIP 1 and 2)
100pFFor Moving Magnet and Moving Coil cartridges
1,000pFFor Moving Coil cartridges
Please refer to your cartridge specification for correct loading settings.
Switch selectable gain (DIP 3 and 4)
Cartridge TypeSensitivity
MC Very Low:100uV to 250uV (74dB)
MC Low:250 to 400uV (70dB)
MC Normal:400uV to 1mV (63dB)
MC High/MM Low:1 to 3mV (52dB)
MM High:3 to 5mV (48dB)
RIAA reproduction characteristics
20Hz to 20,000Hz +/-0.25dB
Output voltage: 0.5V at 1KHz
Power supply requirements
The Dino Mk3 can be powered from either an AC or a DC power supply.
AC requirements: two independent supplies of: 0v / 18v ac, 0v / 18v ac.
DC requirements: two independent supplies of: 0v /-22vdc , 0v / +22vdc
Dimensions and Weight
Overall case dimensions for Dino Mk3:185mm x 58mm x 112mm (D x H x W)
Dino+ PSU:185mm x 58mm x 112mm (D x H x W)
NCPSU:185mm x 58mm x 112mm (D x H x W)
Standard AC PSU:85mm x 50mm x 85mm (D x H x W)
Switch selectable cartridge resistance loading (DIP 1 and 2)
33 ohms | For Moving Coil cartridges | |
100 ohms | For Moving Coil cartridges | |
1,000 ohms | For Moving Coil cartridges | |
47,000 ohms | For Moving Magnet and some Moving Coil cartridges |
Switch selectable capacitance loading (DIP 1 and 2)
100pF | For Moving Magnet and Moving Coil cartridges | |
1,000pF | For Moving Coil cartridges |
Please refer to your cartridge specification for correct loading settings.
Switch selectable gain (DIP 3 and 4)
Cartridge Type | Sensitivity | |
MC Very Low: | 100uV to 250uV (74dB) | |
MC Low: | 250 to 400uV (70dB) | |
MC Normal: | 400uV to 1mV (63dB) | |
MC High/MM Low: | 1 to 3mV (52dB) | |
MM High: | 3 to 5mV (48dB) |
RIAA reproduction characteristics
20Hz to 20,000Hz +/-0.25dB
Output voltage: 0.5V at 1KHz
Power supply requirements
The Dino Mk3 can be powered from either an AC or a DC power supply.
AC requirements: two independent supplies of: 0v / 18v ac, 0v / 18v ac.
DC requirements: two independent supplies of: 0v /-22vdc , 0v / +22vdc
To avoid problems only use Trichord power supplies.
Dimensions and Weight
Overall case dimensions for Dino Mk3: | 185mm x 58mm x 112mm (D x H x W) |
Dino+ PSU: | 185mm x 58mm x 112mm (D x H x W) |
NCPSU: | 185mm x 58mm x 112mm (D x H x W) |
Standard AC PSU: | 85mm x 50mm x 85mm (D x H x W) |